Attività

“The Benefits of Gas Springs: What You Should Know
Gas springs have become a popular alternative to traditional coil-based springs. Also known as pneumatic springs, they consist of a gas-filled cylinder with a piston attached to the end. The piston is extended by default. When exposed to a compressive force, though, the piston will retract inside of the cylinder, thereby pressurizing the gas. The pressurized gas will then exert an outwards force, essentially pushing the piston against the object that’s compressing it. What benefits do gas springs offer exactly?

1. Low Maintenance: Unlike other types of springs, gas springs require little or no maintenance. They still consist of multiple parts. Gas springs have a piston, seals and attachments. However, these parts are enclosed in a cylinder, so maintaining gas springs is a breeze. You don’t have to worry about cleaning the parts, nor do you have to worry about oiling or lubricating them. With their self-enclosed design, gas springs are easy to maintain.

2. Long-Lasting: Gas springs are long-lasting. They typically last longer than other types of springs, in fact. Other types of springs use a purely mechanical method of operation. They consist of a coiled piece of metal, which is used to create extension springs or compression springs. Over time, traditional springs such as these can wear down while losing their ability to store energy. Gas springs feature a gas-filled cylinder that protects them from premature wear and tear. The bottom line is that gas springs are long-lasting.

3. Locking: While not available in gas springs, many of them can be locked in place. There are non-locking gas springs, and there are locking gas springs. Locking gas springs can be “locked” in place. Non-locking gas springs, on the other hand, don’t offer this option. Nonetheless, you can choose either locking or non-locking gas springs. Gas springs are available in both types, which is another reason to consider choosing them over traditional springs.

4. Ergonomics: Another benefit of gas springs is ergonomics. They are more ergonomic than traditional springs. They produce a smooth action when exposed to a compressive force. The piston of a gas spring will simply retract into the cylinder. With this smooth action, gas springs are ergonomic. You can even find them used with certain types of furniture, including office chairs, because of their ergonomic design.

As you can see, gas springs offer several benefits. They are low maintenance, long-lasting, available in non-locking and locking models and offer an ergonomic design.

Advantages Of Buying A Gas Lift Storage Bed
With the increase in population and the reduction in the living spaces, it has resulted in limited storage space. People are inventing smart ways to increase the storage space and avoid clutter. The best discovery of all is the gas lift bed. These are the beds that have incorporated storage space beneath the mattress which has a gas lift mechanism to lift the mattress and easily access the storage space. Gas lift storage beds are also known as hydraulic beds and have guarded space that is practical as well as attractive. Storage of cushions, linen, clothes, sports equipment, toys, shoes, and other assets become

convenient. Check here for a large number of benefits of gas lift beds with the most thought is the underutilized space to store various goods.

Space Utilization – People always talk about the less storage space in the bedroom area but they neglect the space beneath the bed. With the advent of hydraulic beds such as gas lift storage beds, you can efficiently utilize the area to store blankets, pillows, trolleys that you do not use on a regular basis.

Remove Clutter – Non-useful items such as balls, bottle caps, pens would slide under the bed and stay there for months together. Having the benefit of installing gas lift beds the case of dumping everything unwanted under the bed is eliminated and the bedroom remains dust-free always.

Hidden Storage – You can consider this space to be the best secret storage to hide useful items and birthday or Christmas presents for your kids. You can also hide your old shirts and sweaters which do not fit you but you don’t want to give away as there is sentimental value as attached to them. So this place may be considered the best to hide your items.

Better Than Bed With Storage Drawers – Some beds with storage drawers don’t come with legs which result in wastage of storage space because draws cannot be placed in the center of the bed. Secondly, they have faced sliding issues. You can always go and ask people who have used beds with drawers. Gas lift storage beds provide the maximum amount of storage space with the lifting mechanism that lasts for quite a long time.

Benefits of an Electric Linear Actuator
A linear actuator is an actuator that creates motion in a straight line, in contrast to the circular motion of a conventional electric motor. Linear actuators are used in machine tools and industrial machinery, in computer peripherals such as disk drives and printers, in valves and dampers, and in many other places where linear motion is required. Hydraulic or pneumatic cylinders inherently produce linear motion. Many other mechanisms are used to generate linear motion from a rotating motor. The combination of rare earth Magnets and high tech materials is what makes these very strong Linear Actuators exist. Its the electricity that run through these motor armature winding’s and magnets used inside the motors that makes them so strong. Engineers can choose from various technologies such as electrical (electro-mechanical), hydraulic or pneumatic technologies when selecting linear actuators for motion control applications. In nearly all cases, an electrical actuator will prove to be the better choice due to a unique combination of characteristics.

Simpler design: Hydraulic and pneumatic actuators can have many more parts within their system than an electrical actuator, and they can be much more complicated to incorporate into your design. The simpler design of electrical actuators results in savings in terms of design and maintenance because of lower initial and ongoing costs, higher reliability, and fewer spare parts to stock in the case of needed repairs.

Easy to integrate with other systems and equipment: It is much easier to integrate an electrical linear actuator with the microprocessors and programmable controllers that manage the operation of most modern industrial machinery than it is to integrate either a hydraulic or pneumatic solution.

More precise than hydraulics and pneumatics: Electrical actuators provide a much finer level of control throughout the entire motion process enabling the force, speed and torque to vary at different stages during the motion. This capability helps reduce operating cost and increase throughput by reducing the number of equipment changeovers required during a process or for product changeovers in manufacturing.

An electrical actuator provides the application designer or end user with flexible parameters that are often easily set with a simple interface from a PC or other device, allowing more design flexibility in a smaller footprint. In addition, these parameters may enable the device to synchronize with other equipment in an assembly line or production operation, providing the promise of smoother, more efficient operations with less inventory buildup between operations. While hydraulic and pneumatic actuators may have their place in certain applications, most engineers will find that clean, safe, quiet, flexible and economical electrical linear actuators are a better choice for most applications.

How do gas struts work?
The basic principle of a gas struct is the same as for a mechanical coil spring; it is a device for storing energy. However, rather than straining the material that makes up the coil spring, a gas spring stores energy by compressing the Nitrogen gas contained inside. Although it looks similar to a pneumatic or hydraulic cylinder, a gas spring is different because of the fact that it does not require an external energy source to create movement. This is because a gas spring is a completely closed system and once manufactured and charged with inert nitrogen gas, no additional gas is introduced to the system. In gas springs, the pressure on either side of the piston remains equal whether it’s fully extended or fully closed. This again is different to a hydraulic or pneumatic cylinder that requires a pressure differential across the piston in order to move. So, if this is the case, how does it work if no further gas is introduced, and the internal pressure remains equal? The works because the gas strut extends and this is due to the difference in cross-sectional area of the rod where the gas is unable to exert any pressure. It is the difference between the nitrogen gas pressure acting on the internal face of the rod, and the atmospheric pressure acting on the external end of the rod that causes it to extend. As the rod is pushed into the tube the available volume is reduced, gas is compressed and the internal pressure increases, this compression creates the spring like behaviour. An orifice in the piston that is attached to the rod allows the flow of gas across the piston and controls the extension speed. As the rod is pushed into the tube the available volume is reduced, gas is compressed and the internal pressure increases, this compression creates the spring like behaviour. An orifice in the piston that is attached to the rod allows the flow of gas across the piston and controls the extension speed.

Features and Benefits of High-Speed Linear Actuators
When you check linear actuators, you will find out they are classified into different categories: Heavy-duty, Mini, Corrosion-resistant or Waterproof, and so on. But if you want to find out what a high speed actuator is, you will see that there is no standard classification. You will find just some guidelines on how to determine whether the actuator is actually high speed or not. But even those guidelines are vague. The mentioned guidelines consider a number of features. Those are the type of actuator, the drive mechanism, the industry. If you understand what these are, you will know which actuator you should choose. A drive mechanism is one of the limiting factors when it comes to the actuator speed. One more significant factor to consider is the actuator type. Usually, high-speed actuators are thrust-rod type actuators. They are called electric cylinders sometimes. These actuators are applied for pushing and pulling. And these operations require very short retraction and extension time. the speed of such actuators ranges from 0.1 m/sec and higher. High-speed actuators are normally manufactured for applications that operate non-stop. High-speed actuators shall deliver the top precision of movement, too. The leading actuator manufacturers know that the requirements for their products are high. So, reliable companies check that their actuators comply with the following requirements:

They should have a compact design for the convenience;

A potentiometer is definitely a benefit;

Such actuators should have top load-bearing capacity;

They should be able to provide high acceleration value.

When you are selecting a high-speed actuator for your application, you get a decent number of benefits. They are cost-efficient and environmentally friendly. High-speed actuators are quiet. They use clean energy. Therefore, the impact on the environment is minimized. Their maintenance costs are low or absent. Customization options are endless because high-speed actuators can be already made based on the client`s requirements. High-speed actuators are convenient in use. They can be applied in very simple and complex systems. With them, you can make your equipment work perfectly and minimize energy consumption.

http://www.liftgasspring.com/”